・The separation and purification part of the centrifuge and the drive unit are separated by a partition wall to prevent abrasion powder in the drive unit from mixing into the product.

・As the casing is fully open and the basket is in front of the operator, it is easy to clean and check the inside of the basket as well as the back of the basket.

・Since slurry supply, separation, cake washing, crystal recovery, and cleaning can be processed fully automatically without human intervention, contamination due to operator intervention does not occur.

・CIP cleaning and immersion cleaning can be performed. The washing liquid is stored in the tank, and the basket can be soaked and washed while being rotated. Not even a few crystals remain.

・By using a metal filter material, it is possible to prevent the contamination associated with a filter cloth.

・The holes in the metal filter material (electronic beam) have a special shape, so there is no washing residue left in the holes of the filter material.

・In the clean room, only the separation and purification part of the centrifuge is installed, so less installation space is occupied by the centrifuge. Therefore, it is possible to use the clean room more extensively.

・As the casing is fully open and the basket is in front of the operator, production efficiency is improved by shortening the cleaning confirmation time when switching products when the centrifuge is used for multiple products.

・Regulation disks can be used for full automated processing without human intervention, including slurry supply, separation, cake washing, crystal recovery, and cleaning, enabling labor saving without the need for operator intervention.

・By mounting a screw-type residual crystal scraper device (Matsumoto Machine patent), it is possible to recover crystals with the highest efficiency up to the limit of the filter cloth.

・Because of the automatic operation, there are few opportunities for the operator to intervene, thus avoiding health hazards to the operator.

・Vibration caused by imbalance is eliminated through improved uniformity in cake thickness, and cycle time is shortened by increased cake washing efficiency and a higher centrifugal effect.

・Due to the large-sized inspection window, work is possible without opening the casing section when taking samples after the end of the separation process and thus prevents mixing in of contaminants

・The fully-sealed structure of the drive side makes it possible to install the main unit in a clean room.

・The wide-mouth scraper removes the cake from the upper portion of the drum.

・The edge of the scraper blade is reversed for safe and smooth insertion into the rotating cake.

・All Matsumoto Machine centrifuges are custom-made. Regardless of the model, we respond to all requests, so please feel free to contact us if you have any requests or questions. After confirming the desired usage and conditions, our technicians will design from scratch and make a custom-made device.